This set includes two (2) fuel tanks, made up of four (4) parts each. The nose section, main body, tail cone and a key to line up the nose and main body.

Lightly sand the forward mating surface of the main body to remove the print support nibs, insert key, then attach nose section. Light sanding of the outside of the nose section to remove print support nibs will be necessary as well. We recommend using a 220 grit hard sanding stick for the main body mating surface and a 320 grit soft sanding stick/sponge for the nose section. Lastly, insert tail cone into back of main body.

CAD by Sandro Maljic